Support
DIMMER MODULE / 100W LED / 2 WAY
A 2-Way dimmer module for use with dimmable LED’s and Incandescent lamps.
Trailing Edge Only
Compatible loads: Dimmable LED’s, Incandescent lighting, MV Halogen, LV Halogen with electronic Trailing Edge transformers
Push ON/OFF rotary dimmer, Compatible with 2-Way and 3-Way wiring.
When used with a 2-Way toggle switch it can be used to turn the lighting circuit on and off from 2 locations, or in combination with intermediate switches (located elsewhere in the room) for 3 or more locations.
Input: 230VAC ~ 50Hz
Dimming Type: Trailing Edge (TE) Only Dimming.
3-100W: When used with dimmable LED lamps and electronic transformers.
10-250W: When used with Incandescent lamps, MV Halogen lamps and LV Incandescent Ballasts/Electronic TE Transformers.
Operating Temperature: 0-55 C Humidity: 10-90% R.H.
*Not compatible with: Triac dimmable drivers, non-dimmable fluorescent bulbs and tubes, wire wound or toroidal transformers, electric motors and retractive switches.
- Toggle Module / 2-Way
Toggle 2-Way switch On / Off, compatible with 2-Way and 3-Way wiring. This module can be used to switch the same lighting circuit on or off from 1 or 2 locations, or in combination with an intermediate switch (as the middle switch in the lighting circuit) for 3 or more locations. 250 VAC / 10 AX
- Intermediate Toggle Module / 3-way
Intermediate Toggle Switch, 3-Way On/Off, compatible with 3-Way wiring. This module can be used as the middle switch to switch a lighting circuit on or off from 3 or more locations, when used in combination with 2-Way switches located elsewhere in the room. 250 VAC / 10 AX.
