DIMMER MODULE / 120W LED / 2 WAY
A 2-Way dimmer module for use with Buster + Punch dimmer switches, wall plates and detail kits.
Min LED load 2W.
Max LED load 120W
Compatible loads: Dimmable LED’s, Incandescent lighting, MV Halogen, LV Halogen with electronic Leading-Edge transformers
Push ON/OFF with rotary dimmer action, compatible with 2-Way and 3-Way wiring.
Input: 230VAC ~ 50Hz
Dimming Type: Trailing Edge mode with programmable settings of LE (simulated)/TE modes.
Min 3W Max 120W load: When used with dimmable LED lamps and electronic transformers.
Min 0W, Max 120W: When used with Incandescent lamps, MV Halogen lamps and LV Incandescent Ballasts/Electronic Transformers
Operating Temperature: 0-55 C Humidity: 10-90% (relative humidity).
Not compatible with non-dimmable fluorescent bulbs and tubes and electric motors.
Team this dimmer up with a 2-Way toggle switch to turn the lighting circuit on and off from a second location. Add further intermediate switches for three or more locations. Not compatible with retractive switches.
- A 2-Way toggle switch is compatible with 2-Way and 3-Way wiring. This module can be used to switch the same lighting circuit on or off from 1 or 2 locations, or in combination with an intermediate switch (as the middle switch in the lighting circuit) for 3 or more locations. 250 VAC / 10 AX
- A 3-Way intermediate toggle switch is compatible with 3-Way wiring. This module can be used to switch the same lighting circuit on or off, from three or more locations, when used in combination with 2-Way switches. 250 VAC / 10 AX